ABB Powervalue 11 Tower G2 6KVA 6000W Online UPS Tower

Categories: ,
Estimated delivery on 29 June - 1 July, 2026
Description ABB PowerValue 11T G2 A cost-effective solution for maximum power protection   ABB’s PowerValue 11T G2 is a single-phase in/out, double conversion online uninterruptible power supply (UPS) that guarantees up to 10 kW per single UPS of clean, reliable power for your critical single-phase applications. As well as maintaining power to your server room, advertising display, turnstiles, lab equipment, transportation signaling systems, ATM or vending machine, the PowerValue 11T G2 also conditions incoming power to eliminate spikes, swells, sags, noise and harmonics. Featuring voltage and frequency independent (VFI) topology, the tower-only PowerValue 11T G2 saves costs by minimizing energy losses with its double   conversion efficiency of up to 95 percent (up to 98% in ECO mode). Two or three units can be connected in parallel to boost power delivery to a maximum of 30 kW or to provide redundancy. Simple to install or maintain, inexpensive to run and with the most compact online UPS footprint available on the market, the PowerValue 11T G2 provides stable, regulated, transient-free, pure sine wave AC power with extremely tight output voltage regulation. All units can be fitted with up to four external battery modules (EBMs) to extend runtime to well over two hours. Each EBM is dedicated to its corresponding UPS and setup is easily accomplished via the LCD menu   High reliability • Double conversion topology protects the load from all input disturbances • Parallelable up to three units (6-10k only) to provide system redundancy • User replaceable batteries • Wide input voltage tolerance Low cost of ownership • Scalable runtime • High operating efficiency • Low installation and upgrading costs • Compact design • Output power factor of 1.0 (6-10 kVA only) Flexible design • Multiple connectivity options • Each UPS can be connected with up to four parallel battery modules for extended runtime • Adjustable DC voltage and battery charger current • Extended backup time models available • Best power density available in the market segment Efficient service concept • Integrated manually operated maintenance bypass switch (6-10 kVA only) • Easy setup and maintenance (plug and play) • User-friendly display • Remote monitoring options Product features The PowerValue 11T G2 with its cost-effective ABB UPS technology makes a high-performance and is now available to market sectors with lower power requirements: Small server rooms, critical lab or industrial equipment, security installations and applications of a similar power class can now profit from one of 12 PowerValue 11T G2 models. With the most compact online UPS footprint available, the PowerValue 11T G2 features true on-line double conversion. This provides a flexible output frequency and isolates the UPS from upstream disturbances so that the critical load sees only stable, well-regulated, transient-free, pure sine wave AC power. A rated output power factor up to 1.0 (kVA = kW) means the PowerValue 11T G2 delivers 11 percent more active power than a UPS with a power factor of 0.9. The UPS is optimized for modern IT loads and helps users reduce their energy budget with its double conversion efficiency of up to 95 percent (up to 98% in ECO mode). • Low input line disturbances: input PF ≥ 0.995 @ 100 percent linear load – THDi < 3 percent • Flexible configuration for scalable runtime: UPS and EBMs with and without batteries (long backup) • Adjustable DC voltage and battery charger current • Digital charger technology provides accurate charger current setting and reduces charger ripple current • The UPS is delivered with an inbuilt parallel board and paralleling cables. No additional hardware is required for this installation. All this with the same guaranteed high availability and quality standards as ABB’s higher-power premium UPS models – and at the most attractive entry level price around.   UPS configuration Standard • Tower-type, IP20 UPS enclosure • Single-phase in and out • Online double conversion UPS • Paralleling up to three units allows for increase of capacity to 30 kW or redundancy (6-10 kVA only) • Operator and status LCD • Wide voltage input frequency range • Inbuilt batteries (B/B2 versions only) • Maintenance bypass switch (6-10 kVA only) • Plug-and-play Options • Additional battery cabinets (EBM) for scaling autonomy time • SNMP, ModBus and AS400 interface cards for remote control and monitoring of the UPS via a web browser • Sensors – combined with the network interface card, environmental humidity and temperature sensors can be integrated into the system and monitored remotely • Connectivity functionality via Winpower SNMP (network management card), mini SNMP, ModBus, mini ModBus, EMP (environmental monitoring probe), AS400 and mini AS400 Technical specifications GENERAL DATA G2 6kVA Output rated power 6000W Output power factor 1.0 Topology Online double conversion Parallel configuration Yes, up to 3 UPS Inbuilt batteries Yes/Yes/No INPUT Nominal input voltage 208/220/230/240 VAC Input voltage tolerance 100-276 (load dependent) Input current THDi <3% with full resistive load Frequency range 45-55Hz / 54-66Hz (extendable to 40~70HZ at load < 60%) Power factor ≥0.995 OUTPUT Rated output voltage 208/220/230/240 VAC Voltage tolerance ±1% (referred to 230V) Voltage distortion <1% linear load, <5% non linear load Overload capacity (linear 10m: 102-125% load load) on inverter 30s: 126 to 150% load 500 ms: ≥ 150% load Nominal frequency 50 or 60 Hz Crest factor 3:1 (load supported) EFFICIENCY Overall system efficiency Up to 95% In eco-mode Up to 98% ENVIRONMENT Protection rating IP20 Storage temperature UPS: -25°C to 60°C; Batteries: 0°C to 35°C Operating temperature 0°-40°C (up to 50°C at 50% load) Relative humidity 0% to 95% Altitude (above see level) 1000m without derating BATTERIES Type VRLA (valve regulated lead-acid) Inbuilt batteries 16x9Ah(B) 20x9Ah (B2) Charging current 0-4A adjustable (B,B2) 0-12 adjustable (S) Recharge time (inbuilt batteries) 4h to 90% COMMUNICATIONS User interface LCD display Optional communication cards SNMP;ModBus;AS400;Environmental monitoring sensor probe STANDARDS Safety IEC/EN 62040-1 EMC IEC/EN 62040-2 Performance IEC/EN 62040-3 Manufacturing ISO 9001:2015, ISO 14001:2015, OHSAS 18001 WEIGHT, DIMENSIONS Weight 53/63/13 Kg Dimensions w x h x d B / B2: 225 x 589x 452 mm S: 225x 348 x 452 mm *2yrs warranty on parts and service   *Electrical materials and services are subject for site survey and separate proposal.